DataGrabber™

Convenient Field Data Transfer Device

• Inexpensive and compact
• Simple one-button operation
• LED light to indicate status
• Uses separate, replaceable 9V battery
• Data transfer does not interrupt running Levelogger

The DataGrabber™ is a simple portable device that copies data from Solinst dataloggers in the field, to a USB flash drive key, with one push of a button. The DataGrabber connects to the top of a Direct Read Cable, or to the Levelogger using an Adaptor.

Each DataGrabber comes with a Solinst 512 Mb USB flash drive key; the DataGrabber is also compatible with most other USB memory devices. When data is copied to the USB device, the data remains in the Levelogger memory, and is not interrupted if it is still running. A convenient LED indicates when the data download is successful.

How the DataGrabber Works

The DataGrabber connects to a Levelogger's Direct Read Cable; alternatively, a Direct Read to Optical Adaptor allows you to connect it directly to a Levelogger's optical end. The DataGrabber connects to an AquaVent Wellhead using a Connector Cable, or directly to a LevelVent Wellhead. The USB flash drive key is plugged into the socket on the front of the DataGrabber.

A push-button on the DataGrabber starts the downloading process. All of the data in the datalogger's memory is transferred to the USB device. The DataGrabber comes with a 512 Mb USB flash drive key; it is also compatible with most other USB flash drives. The datalogger is not interrupted if it is still logging. The data in the datalogger memory is not erased.

A light changes colour to indicate when the DataGrabber is properly connected, when the data transfer is taking place, and when the data has been successfully downloaded. The DataGrabber uses one 9 volt alkaline or lithium battery that is easy to replace when required.